Die Casting Brass Ingots
Founded in 1945, AMW has deep roots in non – ferrous metallurgical field, A leading name for manufacturing Copper and Copper Based Alloys Flat Rolled Products, we have always tried to distinguish ourselves for continuous improvement in the products evolution and customer service.
Due to the demand of high purity Brass Ingots, AMW developed Brass Ingots by casting it innovatively on Continuous Casting line with channel type Melting / Holding Furnace to ensure uniform Zinc content which normally cannot be achieved on Oil Fired Batch type Melting Furnaces due to longer time to cast the entire molten Metal.
Brass ingots manufactured on Continuous Casting is superior in the followings respect:
- Homogeneous Mixing of all the Element in the Brass Alloy & consistent chemical composition.
- Fine Grain on the cast Ingots / Plate.
- Excellent Surface Finish Free from inclusions like Dross or Ash.
- Consistent Rectangular Cross-Section and weight per Ingot/Plate.
Our Brass ingots with International Standards of ASTM No.C85710 (CC755S) are most suitable for Gravity, Low-Pressure, Pressure Die Casting, sand casting etc for manufacture of Sanitary and industrial taps, valves, fittings, handles, artistic and mechanical products .
We are proud to announce that our Brass ingots / Plate had received immediate excellent acceptance by M/s. Jaquar a leading Sanitary Fittings manufacturer.
Composition of Fine Grain Die Casting Brass Ingots
ASTM No. : CEN EN (CC755S)
Cu |
Pb |
Al |
Fe |
Sn |
P |
Ni |
Zn |
59.5-60.5% |
1.00-1.20% |
0.60-0.70% |
0.07-0.10% |
0.05% Max |
0.003% Max |
0.05% Max |
Balance |
Physical Property of alloy
|
Width |
Thickness |
Length |
Weight |
|
120 |
25 |
300 |
8-9 kg |